Device
Installation
| The Intel USB modem requires a free USB port on your computer. Plug the modem into your computer's USB port once the computer is turned on. |  |
Software
Setup
The first time your USB modem is plugged in,
you will need the setup CD-Rom that came from Qwest. It should
be in the same package as modem.
- Your computer will prompt you to install the drivers,
which will be found on the CD. The CD does NOT contain
drivers for Windows XP.
Click here for Windows XP Instructions. - Once the drivers are found and installed, the setup
process will begin. It will ask a series of questions. The
answers can be found below
- Connection type: PPPoA
- VPI , VCI: 0, 32
- Username/Password: These are found on your SMIG ISP worksheet.
- The SMIG technical support phone number is entered next. 866-438-7644.
- IP addressing is dynamic on our system. (Static IP addresses can be assigned by request. An additional charge applies)
- DNS servers are dynamically assigned.
- After the information has been entered, the setup
process will perform 2 tests. The first test will test the
integrity/functionality of the line. The second test will
test the connection to SMIG across the DSL line.
Please Note: If the first test fails, the Qwest DSL line is not yet working properly. If the second test fails, please contact us. - The software installatin is now completed. Click finish, and now there should be a new icon on your desktop called "Qwest DSL services". To connect to DSL, double click that icon and press connect.
TCP/IP
Setup
When using the Intel DSL modem, you must
connect using the icon described above. Once connected, your
computer will have received its IP address from our server.
Intel USB DSL modems are not designed
to be "shared" or integrated into an existing network.
Although it is possible, we do not support "sharing" of the
Intel USB DSL modems.
More Answers
If
you need further assistance, please e-mail us at smig@smig.net